Cisco CATALYST 2960

2-538
Catalyst 2960 Switch Command Reference
78-16882-01
Chapter 2 Catalyst 2960 Switch Cisco IOS Commands
vtp (VLAN configuration)
This example shows how to enable pruning in the proposed new VLAN database:
Switch(vlan)# vtp pruning
Pruning switched ON
This example shows how to enable v2 mode in the proposed new VLAN database:
Switch(vlan)# vtp v2-mode
V2 mode enabled.
You can verify your settings by entering the show vtp status privileged EXEC command.
Related Commands Command Description
show vtp status Displays the VTP statistics for the switch and general information about the
VTP management domain status.
switchport trunk
pruning
Configures the VLAN pruning-eligible list for ports in trunking mode.
vtp (global
configuration)
Configures the VTP filename, interface, domain name, and mode.