Cisco CATALYST 2960

B-56
Catalyst 2960 Switch Command Reference
78-16882-01
Appendix B Catalyst 2960 Switch Debug Commands
debug spanning-tree
Usage Guidelines The undebug spanning-tree command is the same as the no debug spanning-tree command.
Related Commands Command Description
show debugging Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
show spanning-tree Displays spanning-tree state information.