Cisco CATALYST 2960

Index
IN-8
Catalyst 2960 Switch Command Reference
78-16882-01
MAC access lists 2-59
MAC addresses
displaying
aging time
2-333
all 2-331
dynamic 2-337
notification settings 2-341
number of addresses in a VLAN 2-335
per interface 2-339
per VLAN 2-345
static 2-343
static and dynamic entries 2-329
dynamic
aging time
2-141
deleting 2-35
displaying 2-337
enabling MAC address notification 2-142
static
adding and removing
2-144
displaying 2-343
dropping on an interface 2-145
tables 2-331
MAC address notification, debugging B-16
mac address-table aging-time 2-137
mac address-table aging-time command 2-141
mac address-table notification command 2-142
mac address-table static command 2-144
mac address-table static drop command 2-145
macro apply command 2-147
macro description command 2-150
macro global command 2-151
macro global description command 2-154
macro name command 2-155
macros
adding a description
2-150
adding a global description 2-154
applying 2-151
creating 2-155
displaying 2-372
macros (continued)
interface range
2-56, 2-87
specifying parameter values 2-151
tracing 2-151
manual
audience
xv
purpose of xv
maps
QoS
defining
2-171
displaying 2-355
match (class-map configuration) command 2-157
maximum transmission unit
See MTU
mdix auto command
2-159
media-type command 2-161
member switches
See clusters
memory (boot loader) command
A-14
mkdir (boot loader) command A-15
mls qos aggregate-policer command 2-165
mls qos command 2-163
mls qos cos command 2-167
mls qos dscp-mutation command 2-169
mls qos map command 2-171
mls qos queue-set output buffers command 2-175
mls qos queue-set output threshold command 2-177
mls qos rewrite ip dscp command 2-179
mls qos srr-queue input bandwidth command 2-181
mls qos srr-queue input buffers command 2-183
mls qos-srr-queue input cos-map command 2-185
mls qos srr-queue input dscp-map command 2-187
mls qos srr-queue input priority-queue command 2-189
mls qos srr-queue input threshold command 2-191
mls qos-srr-queue output cos-map command 2-193
mls qos srr-queue output dscp-map command 2-195
mls qos trust command 2-197
mode, MVR 2-204
Mode button, and password recovery 2-238