Cisco CATALYST 2960

Index
IN-7
Catalyst 2960 Switch Command Reference
78-16882-01
ip address command 2-93
IP addresses, setting 2-93
IP DHCP snooping
See DHCP snooping
ip dhcp snooping binding command
2-96
ip dhcp snooping command 2-95
ip dhcp snooping database command 2-98
ip dhcp snooping information option allow-untrusted
command
2-102
ip dhcp snooping information option command 2-100
ip dhcp snooping limit rate command 2-104
ip dhcp snooping trust command 2-105
ip dhcp snooping verify command 2-106
ip dhcp snooping vlan command 2-107
ip igmp filter command 2-108
ip igmp max-groups command 2-109
ip igmp profile command 2-111
ip igmp snooping command 2-113
ip igmp snooping last-member-query-interval
command
2-115
ip igmp snooping querier command 2-117
ip igmp snooping report-suppression command 2-119
ip igmp snooping tcn command 2-121
ip igmp snooping tcn flood command 2-123
ip igmp snooping vlan immediate-leave command 2-124
ip igmp snooping vlan mrouter command 2-125
ip igmp snooping vlan static command 2-127
IP multicast addresses 2-204
IP phones
auto-QoS configuration
2-13
trusting packets sent from 2-197
IP-precedence-to-DSCP map 2-171
IP source guard
displaying
dynamic binding entries only
2-309
ip ssh command 2-129
J
jumbo frames
See MTU
L
LACP
See EtherChannel
lacp port-priority command
2-131
lacp system-priority command 2-133
Layer 2 traceroute
IP addresses
2-503
MAC addresses 2-500
line configuration mode 1-2, 1-5
Link Aggregation Control Protocol
See EtherChannel
link flap
error detection for
2-79
error recovery timer 2-81
load_helper (boot loader) command A-13
load-distribution methods for EtherChannel 2-224
logging file command 2-135
logical interface 2-85
loopback error
detection for
2-79
recovery timer 2-81
loop guard, for spanning tree 2-428, 2-432
M
mac access-group command 2-137
MAC access-groups, displaying 2-327
MAC access list configuration mode 2-139
mac access-list extended command 2-139