Cisco Catalyst 3560 - Starting the Terminal-Emulation Software

C-5
Catalyst 3560 Switch Hardware Installation Guide
78-16057-01
Appendix C Configuring the Switch with the CLI-Based Setup Program
Starting the Terminal-Emulation Software
Figure C-2 Connecting a Switch to a PC
Starting the Terminal-Emulation Software
Before you power on the switch, start the terminal emulation session so that you
can see the output display from the power-on self-test (POST).
The terminal-emulation software—frequently a PC application such as
Hyperterminal or ProcommPlus—makes communication between the switch and
your PC or terminal possible.
1 Catalyst 3560 switch 3 RJ-45-to-DB-9 adapter cable
2 Power cord
RATING
100-200V ~
5.0A-2.5A, 50-60 HZ
CONSOLE
DC INPUTS FOR REMOTE
POWER SUPPLY
SPEC
IFIED
IN MAN
UAL
+12v @7.5A -48 @7.8A
2
3
97934
1