EasyManua.ls Logo

Cisco Catalyst 3560 - Rear Panel Description

Cisco Catalyst 3560
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 2 Product Overview
Rear Panel Description
2-12
Catalyst 3560 Switch Hardware Installation Guide
78-16057-01
Rear Panel Description
The Catalyst 3560 switch rear panel has an AC power connector, an RPS
connector, and an RJ-45 console port. (See Figure 2-4.)
Figure 2-4 Catalyst 3560 Switch Rear Panel
SPEED
10/100 ports
Off Port is operating at 10 Mbps.
Green Port is operating at 100 Mbps.
SFP ports
Off Port is operating at 10 Mbps.
Green Port is operating at 100 Mbps.
Blinking green Port is operating at 1000 Mbps.
Note When installed in Catalyst 3560 switches, 1000BASE-T
SFP modules can operate at 10, 100, or 1000 Mbps in
full-duplex mode or at 10 or 100 Mbps in half-duplex
mode.
Table 2-5 Meaning of Port LED Colors in Different Modes on the Switch (continued)
Port Mode LED Color Meaning
1 RJ-45 console port 3 RPS connector
2 AC power connector 4 Fan exhaust
RATING
100-200V ~
5.0A-2.5A, 50-60 HZ
CONSOLE
DC INPUTS FOR REMOTE
POWER SUPPLY
SPECIFIED IN MANUAL
+12v @7.5A -48 @
7.8A
97914
1 2 3
4

Table of Contents

Other manuals for Cisco Catalyst 3560

Related product manuals