CHAPTER
1-1
Catalyst 3560 Switch Hardware Installation Guide
78-16057-01
1
Using Express Setup
This chapter provides a quick setup procedure for a standalone switch.
Note For setup instructions using the command-line interface (CLI)-based setup
program, go to Appendix C, “Configuring the Switch with the CLI-Based Setup
Program.”
Note Before connecting the switch to a power source, review the safety warnings in
Chapter 3, “Switch Installation.”
The setup procedure includes these steps:
• Taking Out What You Need, page 1-2
• Powering On the Switch, page 1-3
• Starting Express Setup, page 1-4
• Configuring the Switch Settings, page 1-8
• Where to Go Next, page 1-12
To Next Page
Loading...
