Chapter 2 Product Overview
Features
2-2
Catalyst 3560 Switch Hardware Installation Guide
78-16057-01
These are the switch features:
• Hardware
–
Catalyst 3560-24PS switch—24 10/100 Power over Ethernet (PoE) ports
and 2 small form-factor pluggable (SFP) module slots
–
Catalyst 3560-48PS switch—48 10/100 PoE ports and 4 SFP module
slots
• The switches support these SFP modules:
–
1000BASE-SX
–
1000BASE-LX
–
1000BASE-ZX
–
1000BASE-T
–
Coarse Wavelength-Division Multiplexing (CWDM)
Note When installed in Catalyst 3560 switches, 1000BASE-T SFP modules can
operate at 10, 100, or 1000 Mbps in full-duplex mode or at 10 or 100
Mbps in half-duplex mode.
• Configuration
–
For 10/100 ports, the speed and duplex settings are autonegotiated.
–
For 10/100 ports, PoE settings are autonegotiated.
–
For 1000BASE-T SFP module ports, the speed and duplex settings are
autonegotiated.
• Switches are hot-swappable.
• Power redundancy
–
Connection for optional Cisco RPS 675 redundant power system that
operates on AC input and supplies backup DC power output to the
switches.
To Next Page
Loading...
