Chapter 3 Switch Installation
Installing and Removing SFP Modules
3-28
Catalyst 3560 Switch Hardware Installation Guide
78-16057-01
If the module has a bale-clasp latch, pull the bale out and down to eject the
module. If the bale-clasp latch is obstructed and you cannot use your index finger
to open it, use a small, flat-blade screwdriver or other long, narrow instrument to
open the bale-clasp latch.
Figure 3-16 Removing a Bale-Clasp Latch SFP Module by Using a Flat-Blade Screwdriver
Step 5
Grasp the SFP module between your thumb and index finger, and carefully
remove it from the module slot.
Step 6 Place the removed SFP module in an antistatic bag or other protective
environment.
1 Bale clasp
40
41
42
43
44
45
46
47
48
47X
48X
Catalyst 3560
SERIES
PoE-48
1
2
3
4
97929
1
To Next Page
Loading...
