vii
Catalyst 3560 Switch Hardware Installation Guide
78-16057-01
Contents
Class A Notice for Taiwan and Other Traditional Chinese Markets 3-5
VCCI Class A Notice for Japan 3-6
Class A Notice for Korea 3-6
Class A Notice for Hungary 3-7
Installation Guidelines 3-8
Verifying Package Contents 3-10
Verifying Switch Operation 3-11
Connecting a PC or Terminal to the Console Port 3-11
Powering On the Switch and Running POST 3-12
Powering Off the Switch and Disconnecting the Console Port 3-13
Installing the Switch 3-14
Rack Mounting 3-14
Removing Screws from the Switch 3-15
Attaching Brackets to the Catalyst 3560 Switch 3-16
Mounting the Switch in a Rack 3-19
Attaching the Cable Guide 3-20
Wall Mounting 3-20
Attaching the Brackets to the Switch for Wall Mounting 3-20
Attaching the RPS Connector Cover 3-21
Mounting the Switch on a Wall 3-22
Table or Shelf Mounting 3-24
Installing and Removing SFP Modules 3-24
Installing SFP Modules into SFP Module Slots 3-25
Removing SFP Modules from SFP Module Slots 3-27
Connecting to the 10/100 Ports 3-29
Connecting to SFP Modules 3-32
Connecting to Fiber-Optic SFP Modules 3-32
Connecting to 1000BASE-T SFP Modules 3-33
Where to Go Next 3-35
To Next Page
Loading...
