Cisco Catalyst 3650 Hardware Installation Guide

7-3
Catalyst 3650 Switch Hardware Installation Guide
OL-29734-01
Appendix 7 Connector and Cable Specifications
Connector Specifications
SFP and SFP+ Modules
Figure 7-4, Figure 7-5, and Figure 7-6 show the SFP module connectors.
The switch supports the SFP module patch cable, a 0.5-meter, copper, passive cable with SFP module
connectors at each end (Figure 7-7). This cable can be used (only with 1-Gigabit Ethernet SFP ports) to
connect two Catalyst 3650 switches in a cascaded configuration.
Figure 7-4 Duplex LC Cable Connector
Figure 7-5 Simplex LC Cable Connector
Figure 7-6 Copper SFP Module RJ-45 Connector
58476
57
834
60915
2 3145678Pin Label
1
2
3
4
5
6
7
8
TP0+
TP0-
TP1+
TP2+
TP2-
TP1-
TP3+
TP3-

Cisco Catalyst 3650 Specifications

General

Switching Capacity	160 Gbps
Uplink Interfaces	4 x 1G SFP or 2 x 10G SFP+
Device Type	Switch
Form Factor	Rack-mountable
Layer	Layer 3
DRAM	4 GB
Flash Memory	4 GB
Operating System	Cisco IOS XE
Model	Catalyst 3650
Ports	24 or 48 10/100/1000 Ethernet ports
Stacking	Yes
Power over Ethernet (PoE)	Yes
Power Supply Options	350W AC
VLANs	4094