Cisco Catalyst 3650 Hardware Installation Guide

Contents
iv
Catalyst 3750-X and 3560-X Switch Hardware Installation Guide
OL-19593-03
RPS Connector 1-26
Cisco RPS 2300 1-26
Fan Modules 1-27
Fan Airflow for Catalyst 3650-24PDM and 3650-48FQM Switches 1-28
Management Ports 1-28
Ethernet Management Port 1-28
RJ-45 Console Port 1-28
Management Options 1-29
Network Configurations 1-30
CHAPTER 2 Switch Installation 2-1
Preparing for Installation 2-1
Safety Warnings 2-1
Installation Guidelines 2-3
Tools and Equipment 2-4
Verifying Switch Operation 2-4
Powering Off the Switch 2-5
Planning a Switch Data Stack 2-5
Switch Stacking Guidelines 2-5
Data Stack Cabling Configurations 2-5
Data Stack Bandwidth and Partitioning Examples 2-6
Power-On Sequence for Switch Data Stacks 2-7
Changes to Switch Stack Membership 2-8
Installing the Switch 2-9
Rack-Mounting 2-9
Attaching the Rack-Mount Brackets 2-10
Mounting the Switch in a Rack 2-13
Table- or Shelf-Mounting 2-14
After Installing the Switch 2-14
Connecting to the StackWise Ports 2-15
Installing and Removing SFP and SFP+ Modules 2-17
Installing SFP and SFP+ Modules 2-17
Removing SFP or SFP+ Modules 2-19
Connecting Devices to the Ethernet Ports 2-19
10/100/1000 Ethernet Port Connections 2-20
100M/1G/2.5G/5G/10G Ethernet Port Connections 2-20
PoE+ Port and Cisco UPOE™ Connections 2-20
Where to Go Next 2-22

Cisco Catalyst 3650 Specifications

General

Switching Capacity	160 Gbps
Uplink Interfaces	4 x 1G SFP or 2 x 10G SFP+
Device Type	Switch
Form Factor	Rack-mountable
Layer	Layer 3
DRAM	4 GB
Flash Memory	4 GB
Operating System	Cisco IOS XE
Model	Catalyst 3650
Ports	24 or 48 10/100/1000 Ethernet ports
Stacking	Yes
Power over Ethernet (PoE)	Yes
Power Supply Options	350W AC
VLANs	4094