Cisco Catalyst 3650 - Page 6

Contents
vi
Catalyst 3750-X and 3560-X Switch Hardware Installation Guide
OL-19593-03
Replacing a Failed Data Stack Member 5-6
APPENDIX 6 Technical Specifications 6-1
Switch Specifications 6-1
Power Supply Module Specifications 6-4
Fan Module Specifications 6-7
APPENDIX 7 Connector and Cable Specifications 7-1
Connector Specifications 7-1
10/100/1000 Ports 7-1
100M/1G/2.5G/5G/10G Ports 7-2
10-Gigabit Ethernet CX1 (SFP+ Copper) Connectors 7-2
SFP and SFP+ Modules 7-3
10/100/1000 Ethernet Management Port 7-4
Console Port 7-4
Cable and Adapter Specifications 7-5
StackWise Cables 7-5
StackWise Cables Minimum Bend Radius and Coiled Diameter 7-6
StackWise Adapters 7-6
Locating the StackWise Adapter Serial Number 7-7
StackWise Adapter Blanks 7-7
SFP and SFP+ Module Cable Specifications 7-8
Four Twisted-Pair Cable Pinouts 7-8
Two Twisted-Pair Cable Pinouts 7-9
Identifying a Crossover Cable 7-9
Console Port Adapter Pinouts 7-9
APPENDIX 8 Configuring the Switch with the CLI-Based Setup Program 8-1
Accessing the CLI 8-1
Accessing the CLI Through Express Setup 8-1
Accessing the CLI Through a Console Port 8-2
RJ-45 Console Port 8-2
USB Console Port 8-2
Installing the Cisco Microsoft Windows USB Device Driver 8-3
Uninstalling the Cisco Microsoft Windows USB Driver 8-4
Uninstalling the Cisco Microsoft Windows USB Driver Using the Add or Remove Programs
Utility
8-4
Uninstalling the Cisco Microsoft Windows USB Driver Using the Setup.exe Program 8-5
Entering the Initial Configuration Information 8-5