Cisco Catalyst 9300 Series Hardware Installation Guide

C9300-NM-4M Module 73
C9300-NM-2Y Module 74
C9300-NM-8X Module 74
C9300X-NM-2C Module 74
C9300X-NM-4C Module 74
C9300X-NM-8M Module 75
C9300X-NM-8Y Module 75
Removing a Network Module 76
Installing and Removing Cisco Transceiver Modules 77
Installing a Cisco Pluggable Transceiver Module 77
Removing Cisco Pluggable Transceiver Modules 78
Finding the Network Module Serial Number 79
Installing a Power Supply 81
CHAPTER 5
Power Supply Modules Overview 81
Installation Guidelines 86
Installing or Replacing an AC Power Supply 87
Installing a DC Power Supply 89
Equipment That You Need 89
Grounding the Switch 90
Installing the DC Power Supply in the Switch 92
Wiring the DC Input Power Source 93
Finding the Power Supply Module Serial Number 94
Installing a Fan Module 97
CHAPTER 6
Fan Modules Overview 97
Installation Guidelines 98
Installing a Fan Module 98
Finding the Fan Module Serial Number 99
Installing a USB 3.0 SSD 101
CHAPTER 7
USB 3.0 SSD Overview 101
Installing an SSD Module on C9300, C9300X and C9300L Switches 102
Installing an SSD Module on C9300LM Switches 104
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
v
Contents

Cisco Catalyst 9300 Series Specifications

General

Operating System	Cisco IOS XE
Model	Cisco Catalyst 9300 Series
Uplink Interfaces	10G, 25G, 40G
Downlink Interfaces	1G
Stacking Bandwidth	480 Gbps
Power Supply	Redundant power supplies
PoE	UPOE
Port Density	Up to 48 ports
Power over Ethernet (PoE)	UPOE, UPOE+
Security Features	MACsec
Management	Cisco DNA Center, CLI, SNMP
Redundancy	Stacking, redundant power supplies, hot-swappable fans