Cisco Catalyst 9404R Switch User Manual

SpecificationItem
Slope
Acceleration Spectral
Density
Spectral Break Point
Frequencies
Random Vibration
(Nonoperating and
Storage)
6 db /octave-2.5 – 5 Hz
-1.0 [(m/s²)²]/Hz*
(0.01 g²/Hz)
5 – 100 Hz
24 db /octave-100 – 200 Hz
10
Minimum ambient temperature for cold startup is 0ºC
11
Short-term exceptional conditions are for no longer than a one-year period of—96 consecutive hours,
or 360 hours total, or 15 occurrences.
Power Supply Specifications
3200 W AC-Input Power Supply Specifications
The following table lists specifications for the 3200 W AC input power supply:
Table 14: 3200 W AC-Input Power Supply Specifications
DescriptionSpecification
Wide-ranging input with power factor correction.
Power factor correction is a standard feature on AC-input power supplies.
Power factor correction reduces the reactive component in the source
AC current, allowing higher power factors (0.90 minimum at loads equal
to or greater than 20 percent of maximum loads, and 0.95 minimum at
3200W maximum loads, at 115/230 VAC nominal AC input voltages)
and lower harmonic current components.
Note
AC-input type
Low-line (115 VAC nominal)—85 VAC (min) to 132 VAC (max)
High-line (230 VAC nominal)—180 VAC (min) to 264 VAC (max)
AC-input voltage
17.6 A at 100 VAC (1570 W output)
17.6 A at 200 VAC (3200 W output)
AC-input current
50/60Hz nominal (47 to 63Hz full range)AC-input frequency
Cisco Catalyst 9400 Series Switches Hardware Installation Guide
122
Specifications
Power Supply Specifications

Cisco Catalyst 9404R Switch Specifications

General

Brand	Cisco
Model	Catalyst 9404R Switch
Category	Switch
Language	English