Figure 23: Top Cover and Base Cover
Establishing System Ground
To attach the grounding lug and cable to the grounding pad, perform these steps
Before you begin
To connect the system ground, you require the following tools and materials:
• Grounding lug—A two-hole grounding lug, which supports up to 6 AWG size. Supplied as part of the
standard accessory kit.
• Grounding screws—Two M4 x 8 mm (metric) pan-head screws. Supplied as part of the standard accessory
kit.
Cisco Catalyst 9400 Series Switches Hardware Installation Guide
74
Installing the Switch
Establishing System Ground
To Next Page
Loading...
