Figure 4: Installation Tasks
Unpacking the Switch
Check the contents of the shipping container:
Procedure
Step 1 Check the contents of the accessory kit. Verify that you have received all the listed equipment, including any
optional equipment you may have ordered, such as, network interface cables, transceivers, or special connectors.
Step 2 Check the modules in each slot. Ensure that the configuration matches the packing list and that all of the
specified interfaces are included.
Step 3 Store the shipping carton.
Cisco Catalyst 9400 Series Switches Hardware Installation Guide
45
Installing the Switch
Unpacking the Switch
To Next Page
Loading...
