Cisco Catalyst 9404R Switch User Manual

DescriptionFeature
Accommodates two line cards. Supported model
numbers:
• Cisco Catalyst 9400 Series 48-Port UPOE
10/100/1000 Module (C9400-LC-48U) and the
module spare (C9400-LC-48U=)
• Cisco Catalyst 9400 Series 48-Port 10/100/1000
Module (C9400-LC-48T) and the module spare
(C9400-LC-48T=)
• Cisco Catalyst 9400 Series 24-Port SFP/SFP+
Module (C9400-LC-24XS) and the module spare
(C9400-LC-24XS=).
• Cisco Catalyst 9400 Series 48-Port UPOE
Multigigabit Module (C9400-LC-48UX) and the
module spare (C9400-LC-48UX=).
• Cisco Catalyst 9400 Series 48-Port SFP Module
(C9400-LC-48S) and the module spare
(C9400-LC-48S=)
• Cisco Catalyst 9400 Series 24-Port SFP Module
(C9400-LC-24S) and the module spare
(C9400-LC-24S=)
• Cisco Catalyst 9400 Series 48-Port Gigabit
Ethernet POE/POE+ Module (C9400-LC-48P)
and the module spare (C9400-LC-48P=)
See Cisco Catalyst 9400 Series Switching Module
Installation Note.
Switching modules
The switch supports a single front and rear serviceable
and hot-swappable fan tray with 8 fans.
Supported model number—C9404-FAN and
C9404-FAN= (Spare)
See Fan Tray Assembly Overview, on page 17 and
Power Supply LEDs, on page 134.
Fan tray assembly
The chassis supports up to four AC-input power
supply modules. Supported model numbers are:
C9400-PWR-3200AC and C9400-PWR-3200AC=
(Spare).
See Power Supply Module Overview, on page 20 and
Power Supply LEDs, on page 134.
Power supplies
240 Gbps backplane bandwidth for each payload
module slot.
Backplane
Cisco Catalyst 9400 Series Switches Hardware Installation Guide
7
Product Overview
Catalyst 9404R Switch

Cisco Catalyst 9404R Switch Specifications

General

Brand	Cisco
Model	Catalyst 9404R Switch
Category	Switch
Language	English