4-22
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
Chapter 4 Installing the VDS Internet Streamer Software and Initially Configuring a CDE
Re manufacturing a CDE
------------------------------------------------------------------
System type : CDE280-2S5
Software status : Successfully installed
1. Configure Hardware
2. Install all software
3. Exit
Step 8 From the Installer Main Menu, choose Option 3 to exit the installer. You should see a display similar to
this:
unmounting /swstore... done
unmounting /sw... done
unmounting /state... done
unmounting /local/local1... done
unmounting /disk23-01... done
unmounting /disk22-01... done
unmounting /disk21-01... done
unmounting /disk20-01... done
unmounting /disk19-01... done
unmounting /disk18-01... done
unmounting /disk17-01... done
Note There may be slight variations in the output.
Step 9 Un-mount the ISO file:
From the Virtual Media tab, select Activate Virtual Devices.
Figure 4-14 Activating Virtual Devices
Note When you select Activate Virtual Devices, the system prompts whether you want to unmount
the iso file or not.
Step 10 From the Power tab, select Power Cycle Systems (cold boot) to reboot the server.
To Next Page
Loading...
Need help?
General
