E-4
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
Appendix E Configuring VDS-IS CDE280 Disks
Changing the Disk Status Using KVM Console
Figure E-4 Selecting all the Disks
Step 13
Select OK and press Enter.
On successful conversion, you can view all the disks displayed under Unconfigured Drives in the
Virtual Drive Management (VD Mgmt) window.
Step 14 Press Ctrl-N key combination to go to Physical Drive Management (PD Mgmt) window.
You can view all the disks state as Unconfigured Good in the PD Management window.
To Next Page
Loading...
Need help?
General
