E-5
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
Appendix E Configuring VDS-IS CDE280 Disks
Changing the Disk Status Using KVM Console
Figure E-5 Physical Drive Management
Step 15
To verify the physical status of the disk, choose Storage > Cisco 12G SAS Modular Raid Controller
(SLOT-HBA) > Physical Drive Info from the CIMC Console.
You can view that the physical drive status is changed as Unconfigured Good.
Figure E-6 Physical Drive Info
To Next Page
Loading...
