Contents
v
Cisco Content Delivery Engine 205/220/250/280/285/420/460/475 Hardware Installation Guide
CHAPTER
2 Preparing to Install the Content Delivery Engines 2-1
Site Requirements 2-1
Preventing Electrostatic Discharge Damage 2-1
Environmental and Physical Specifications 2-2
Storage Drive Cautions 2-3
Safety Warnings 2-4
AC Power Option Warnings 2-7
DC Power Option Warnings 2-7
Safety Guidelines 2-8
Emissions Disclaimer 2-9
Intended Uses 2-9
If AC Power Supplies Are Installed 2-9
Supplemental Grounding Connection 2-10
If DC Power Supplies Are Installed 2-12
Temperature and Ventilation 2-13
CHAPTER
3 Installing the Content Delivery Engines 3-1
Tools and Parts Required 3-1
Unpacking the Box 3-1
Inspecting for Damage 3-2
Installing the CDEs 3-2
Reviewing Rack Installation Safety Guidelines 3-3
Preparing the CDEs for Rack Installation 3-3
Replacing External Storage Drives 3-3
Replacing a CDE280 Drive 3-8
Replacing a Power Supply 3-9
Replacing a CDE280 Power Supply 3-12
Device Connection Test in a VDS-TV Environment 3-13
Installing SFPs 3-13
Rail Kits 3-14
Installing a CDE205, CDE220, in the Rack Using a Rev. A Rail Kit 3-14
Installing a CDE285 3-19
Replacing CDE285 3-19
Installing a CDE420 in the Rack Using a Rev. A Rail Kit 3-19
Installing a CDE205, CDE220, CDE420, and CDE460 in the Rack Using a Rev. B Rail
Kit
3-24
Installing a CDE280 in the Rack Using a Rail Kit 3-30
Unpacking and Inspecting the Server 3-31
To Next Page
Loading...
