CDO's management center support is limited to device onboarding, viewing its managed devices, viewing
objects associated with the management center, and cross-launching the management center.
For a management center high-availability pair, you also need to integrate the secondary
management center with Cisco Security Cloud.
Note
f) Click Launch CDO if you do not already have it open, or log in here: https://www.defenseorchestrator.com/
.
Make sure CDO is not blocked by a pop-up blocker.
Step 2 On the CDO Dashboard (https://www.defenseorchestrator.com/), click Onboard ( ).
Step 3 Click the FTD tile.
Figure 41: FTD Tile
Step 4 On the Onboard FTD Device screen, click Use Serial Number.
Figure 42: Use Serial Number
Step 5 In Select FMC, choose an On-Prem FMC from the list, and click Next.
Cisco Firepower 2100 Getting Started Guide
72
Threat Defense Deployment with a Remote Management Center
Add a Device to the Management Center Using Low-Touch Provisioning
To Next Page
Loading...
Need help?
General