Cisco Firepower 9300 - Hardware Specifications

WSP-Q40GLR4L40G-LR4L
Cisco QSFP-H40G-CU40G-CU, 1M, 3M, 5M
QSFP-4SFP10G-CU40G-4X10G-CU, 1M, 3M, 5M
Cisco QSFP-H40G-ACU40G-CU-A, 7M, 10M
QSFP-4X10G-AC40G-4X10G-CU-A, 7M, 10M
QSFP-H40G-AOC40G-AOC, 1M, 2M, 3M, 5M, 7M, 10M, 15M
100 Gb
QSFP-100G-SR4-S100G-SR4-S
QSFP-100G-LR4-S100G-LR4-S
QSFP-100G-AOCxM100G-AOC, 1m, 2m, 3m, 5m, 7m,10m, 15m, 20m,
25m, 30m
QSFP-100G-CUxM
Supported only on the 2- and 4-port
100-Gb single-wide network modules
(FPR-NM-2X100G and
FPR-NM-4X100G).
Note
100G-CUxM, 1m, 2m, 3m, 5m
Hardware Specifications
The following table contains hardware specifications for the Firepower 9300.
Physical Specifications for the 9300 Chassis
5.25 x 17.5 x 32 in. (13.3 x 44.5 x 81.3 cm)
Dimensions (H x W x D)
105 lb (47.7 kg) with one security module
135 lb (61.2 kg) fully configured
Weight
Physical Specification for the 9300 Security Module
1.95 x 8 x 24.2 in. (50 x 203 x 620 mm)
Dimensions
15.5 lb (7.03 kg)Weight
Memory Per 9300 Security Module
256 GB—SM-24, SM-36, SM-44
384 GB—SM-40, SM-48, SM-56
DDR4 DIMM
Power
Cisco Firepower 9300 Hardware Installation Guide
31
Overview
Hardware Specifications