Cisco Firepower 9300 - Power Cord Specifications

DescriptionPID
Firepower 9000 series HVDC power supply moduleFPR9K-PS-HVDC
Firepower 9000 series HVDC power supply module
(spare)
FPR9K-PS-HVDC=
Firepower 9000 series fan moduleFPR9K-FAN
Firepower 9000 series fan module (spare)FPR9K-FAN=
Firepower 9000 series 800-GB SSD for the SM-24,
SM-36, and SM-44 security modules
FPR9K-SM-S800GS1
Firepower 9000 series 800-GB SSD for the SM-24,
SM-36, and SM-44 security modules (spare)
FPR9K-SM-S800GS1=
Firepower 9000 series 1.6-TB SSD for the SM-40,
SM-48, and SM-56 security modules
FPR9K-SM-SSD1.6TB
Firepower 9000 series 1.6-TB SSD for the SM-40,
SM-48, and SM-56 security modules (spare)
FPR9K-SM-SSD1.6TB=
Firepower 9000 series rack-mount kitFPR9K-RMK
Firepower 9000 series rack-mount kit (spare)FPR9K-RMK=
Power Cord Specifications
Each power supply has a separate power cord. Standard power cords or jumper power cords are available for
connection to the security appliance. The jumper power cords for use in racks are available as an optional
alternative to the standard power cords. The chassis ships with one power cord; the default is the US version.
You must choose the country-specific power cord when ordering your security appliance.
If you do not order the optional power cord with the system, you are responsible for selecting the appropriate
power cord for the product. Using an incompatible power cord with this product may result in electrical safety
hazard. Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered with
the system.
Only the approved power cords or jumper power cords provided with the security appliance are supported.
Note
The following power cords are supported:
Cisco Firepower 9300 Hardware Installation Guide
36
Overview
Power Cord Specifications