Cisco Firepower 9300 Hardware Installation Guide

Installation Preparation 43
CHAPTER 2
Installation Warnings 43
Safety Recommendations 46
Maintain Safety with Electricity 46
Prevent ESD Damage 47
Site Environment 47
Site Considerations 47
Power Supply Considerations 48
Rack Configuration Considerations 48
Rack-Mount and Ground the Chassis 51
CHAPTER 3
Unpack and Inspect the Chassis 51
Rack-Mount the Chassis 52
Ground the Chassis 56
Installation, Maintenance, and Upgrade 59
CHAPTER 4
Remove and Replace the Supervisor 59
Install, Remove, and Replace the Security Module 60
Remove and Replace the SSD 62
Install, Remove, and Replace the Single-Wide Network Module 63
Install, Remove, and Replace the Double-Wide Network Module 67
Remove and Replace the Power Supply Module 70
Connect the DC Power Supply Module 72
Connect the HVDC Power Supply Module 73
Remove and Replace the Fan Module 75
Install the FIPS Opacity Shield 77
Cisco Firepower 9300 Hardware Installation Guide
iv
Contents

Cisco Firepower 9300 Specifications

General

Chassis	Modular
Security Modules	Up to 3
Firewall Throughput	Up to 1.2 Tbps
Management	Cisco Firepower Management Center
Form Factor	Rack-mountable
Number of Slots	3
Encryption Throughput	Up to 100 Gbps
Operating Temperature	32 to 104°F (0 to 40°C)
Humidity	10% to 90% non-condensing
Altitude	Up to 10, 000 ft
Power Supply	Dual, hot-swappable
Product Type	Security Appliance
Supported Modules	Security, network, and interface modules
Redundancy	Yes