Figure 36: Secure Chassis Ears to Rack with Screws
What to do next
Replace the components that you removed to rack-mount the chassis. For information on replacing Firepower
9300 components, see Installation, Maintenance, and Upgrade, on page 59.
Ground the chassis. See Ground the Chassis, on page 56 for the procedure.
Install the FIPS opacity shield if necessary. See Install the FIPS Opacity Shield, on page 77 for the procedure.
Install the cables according to your default software configuration as described in the Cisco Firepower 9300
Getting Started Guide.
Cisco Firepower 9300 Hardware Installation Guide
55
Rack-Mount and Ground the Chassis
Rack-Mount the Chassis
To Next Page
Loading...
