Cisco FirePOWER ASA 5500 series

Contents
v
Cisco Security Appliance Command Line Configuration Guide
OL-10088-01
Enabling Multiple Context Mode 3-10
Restoring Single Context Mode 3-11
CHAPTER 4 Configuring Switch Ports and VLAN Interfaces for the Cisco ASA 5505 Adaptive Security
Appliance
4-1
Interface Overview 4-1
Understanding ASA 5505 Ports and Interfaces 4-2
Maximum Active VLAN Interfaces for Your License 4-2
Default Interface Configuration 4-3
VLAN MAC Addresses 4-4
Power Over Ethernet 4-4
Monitoring Traffic Using SPAN 4-4
Security Level Overview 4-5
Configuring VLAN Interfaces 4-5
Configuring Switch Ports as Access Ports 4-9
Configuring a Switch Port as a Trunk Port 4-11
Allowing Communication Between VLAN Interfaces on the Same Security Level 4-13
CHAPTER 5 Configuring Ethernet Settings and Subinterfaces 5-1
Configuring and Enabling RJ-45 Interfaces 5-1
Configuring and Enabling Fiber Interfaces 5-2
Configuring and Enabling Subinterfaces 5-3
CHAPTER 6 Adding and Managing Security Contexts 6-1
Configuring Resource Management 6-1
Classes and Class Members Overview 6-1
Resource Limits 6-2
Default Class 6-3
Class Members 6-4
Configuring a Class 6-4
Configuring a Security Context 6-7
Automatically Assigning MAC Addresses to Context Interfaces 6-11
Changing Between Contexts and the System Execution Space 6-11
Managing Security Contexts 6-12
Removing a Security Context 6-12
Changing the Admin Context 6-13
Changing the Security Context URL 6-13
Reloading a Security Context 6-14