Cisco FirePOWER ASA 5500 series

Contents
vi
Cisco Security Appliance Command Line Configuration Guide
OL-10088-01
Reloading by Clearing the Configuration 6-14
Reloading by Removing and Re-adding the Context 6-15
Monitoring Security Contexts 6-15
Viewing Context Information 6-15
Viewing Resource Allocation 6-16
Viewing Resource Usage 6-19
Monitoring SYN Attacks in Contexts 6-20
CHAPTER 7 Configuring Interface Parameters 7-1
Security Level Overview 7-1
Configuring the Interface 7-2
Allowing Communication Between Interfaces on the Same Security Level 7-6
CHAPTER 8 Configuring Basic Settings 8-1
Changing the Login Password 8-1
Changing the Enable Password 8-1
Setting the Hostname 8-2
Setting the Domain Name 8-2
Setting the Date and Time 8-2
Setting the Time Zone and Daylight Saving Time Date Range 8-3
Setting the Date and Time Using an NTP Server 8-4
Setting the Date and Time Manually 8-4
Setting the Management IP Address for a Transparent Firewall 8-5
CHAPTER 9 Configuring IP Routing 9-1
Configuring Static and Default Routes 9-1
Configuring a Static Route 9-2
Configuring a Default Route 9-3
Configuring Static Route Tracking 9-3
Defining Route Maps 9-6
Configuring OSPF 9-7
OSPF Overview 9-8
Enabling OSPF 9-8
Redistributing Routes Into OSPF 9-9
Configuring OSPF Interface Parameters 9-10
Configuring OSPF Area Parameters 9-12
Configuring OSPF NSSA 9-13
Configuring Route Summarization Between OSPF Areas 9-14