Cisco IE-3000-8TC - Page 22

Contents
xxii
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-03
Default Port Security Configuration 26-11
Port Security Configuration Guidelines 26-11
Enabling and Configuring Port Security 26-12
Enabling and Configuring Port Security Aging 26-17
Displaying Port-Based Traffic Control Settings 26-19
CHAPTER 27 Configuring LLDP, LLDP-MED, and Wired Location Service 27-1
Understanding LLDP, LLDP-MED, and Wired Location Service 27-1
LLDP 27-1
LLDP-MED 27-2
Wired Location Service 27-3
Configuring LLDP, LLDP-MED, and Wired Location Service 27-4
Default LLDP Configuration 27-4
Configuration Guidelines 27-5
Enabling LLDP 27-5
Configuring LLDP Characteristics 27-5
Configuring LLDP-MED TLVs 27-6
Configuring Network-Policy TLV 27-7
Configuring Location TLV and Wired Location Service 27-9
Monitoring and Maintaining LLDP, LLDP-MED, and Wired Location Service 27-10
CHAPTER 28 Configuring CDP 28-1
Understanding CDP 28-1
Configuring CDP 28-2
Default CDP Configuration 28-2
Configuring the CDP Characteristics 28-2
Disabling and Enabling CDP 28-3
Disabling and Enabling CDP on an Interface 28-4
Monitoring and Maintaining CDP 28-5
CHAPTER 29 Configuring UDLD 29-1
Understanding UDLD 29-1
Modes of Operation 29-1
Methods to Detect Unidirectional Links 29-2
Configuring UDLD 29-3
Default UDLD Configuration 29-4
Configuration Guidelines 29-4
Enabling UDLD Globally 29-5