Cisco IE-3000-8TC - Page 24

Contents
xxiv
Cisco IE 3000 Switch Software Configuration Guide
OL-13018-03
Collecting Group Ethernet Statistics on an Interface 31-5
Displaying RMON Status 31-6
CHAPTER 32 Configuring System Message Logging 32-1
Understanding System Message Logging 32-1
Configuring System Message Logging 32-2
System Log Message Format 32-2
Default System Message Logging Configuration 32-3
Disabling Message Logging 32-4
Setting the Message Display Destination Device 32-5
Synchronizing Log Messages 32-6
Enabling and Disabling Time Stamps on Log Messages 32-7
Enabling and Disabling Sequence Numbers in Log Messages 32-8
Defining the Message Severity Level 32-8
Limiting Syslog Messages Sent to the History Table and to SNMP 32-10
Enabling the Configuration-Change Logger 32-10
Configuring UNIX Syslog Servers 32-12
Logging Messages to a UNIX Syslog Daemon 32-12
Configuring the UNIX System Logging Facility 32-12
Displaying the Logging Configuration 32-13
CHAPTER 33 Configuring SNMP 33-1
Understanding SNMP 33-1
SNMP Versions 33-2
SNMP Manager Functions 33-3
SNMP Agent Functions 33-3
SNMP Community Strings 33-4
Using SNMP to Access MIB Variables 33-4
SNMP Notifications 33-5
SNMP ifIndex MIB Object Values 33-5
Configuring SNMP 33-6
Default SNMP Configuration 33-6
SNMP Configuration Guidelines 33-6
Disabling the SNMP Agent 33-7
Configuring Community Strings 33-8
Configuring SNMP Groups and Users 33-9
Configuring SNMP Notifications 33-11
Setting the CPU Threshold Notification Types and Values 33-15
Setting the Agent Contact and Location Information 33-16