Cisco IP Communicator - Modifying Phone Button Templates; Configuring Softkey Templates

5-15
Cisco IP Communicator Administration Guide for Cisco CallManager
OL-4698-01
Chapter 5 Configuring Features and Services
Modifying Phone Button Templates
Modifying Phone Button Templates
Phone button templates let you assign features to line/speed dial buttons.
Ideally, you modify templates before registering devices on the network. In this
way, you can access customized template options from Cisco CallManager during
registration.
To modify a template, choose Device > Device Settings > Phone Button
Tem plate from the Cisco CallManager Administration web application. To assign
a template to a device, use the Phone Button Template field in the
Cisco CallManager Administration Phone Configuration page. Refer to
Cisco CallManager Administration Guide and Cisco CallManager System Guide
for more information.
The default Cisco IP Communicator template uses buttons 1 and 2 for lines and
assigns buttons 3 through 8 as speed dial. Access other telephony features, such
as call park, call forward, redial, hold, resume, voice messaging system,
conferencing, and so on using softkeys in the Cisco IP Communicator interface.
Related Topics
• Telephony Features Available for Cisco IP Communicator, page 5-2
• Configuring Corporate and Personal Directories, page 5-5
• Configuring Softkey Templates, page 5-15
• Setting Up Services, page 5-16
• Adding Users to Cisco CallManager, page 5-17
Configuring Softkey Templates
Using Cisco CallManager, you can manage softkeys associated with applications
that are supported by Cisco IP Communicator. Cisco CallManager supports two
types of softkey templates: standard and nonstandard. An application that
supports softkeys can have one or more standard softkey templates associated
with it. You cannot modify standard softkey templates (modify nonstandard
templates only).