Cisco IP Communicator - Forwarding Your Calls to Another Number

1-9
Cisco IP Communicator Administration Guide for Cisco CallManager
OL-4698-01
Chapter 1 An Overview of Cisco IP Communicator
Supported Audio Formats
Related Topics
• Supported Audio Formats, page 1-9
• How Cisco IP Communicator Interacts with Cisco CallManager, page 1-9
• Installation Prerequisites, page 2-2
• Understanding the Startup Process, page 1-10
Supported Audio Formats
Cisco IP Communicator supports the following audio formats:
• G.711a
• G.711u
• G.729
• G.729a
• Uncompressed wideband (16bits, 16kHz)
Related Topics
• Supported Networking Protocols, page 1-7
• How Cisco IP Communicator Interacts with Cisco CallManager, page 1-9
• Installation Prerequisites, page 2-2
• Specifying Low-Bandwidth for Remote Use, page 4-15
How Cisco IP Communicator Interacts with
Cisco CallManager
Cisco IP Communicator is a software application that enables you to
communicate using voice over a data network. To provide this capability,
Cisco IP Communicator depends upon Cisco CallManager, an open and
industry-standard call processing system. Cisco CallManager software sets up
and tears down calls between phone devices, integrating traditional PBX