Cisco IP Communicator - Configuring Quick Search; Understanding How Quick Search Works; How to Configure Quick Search Using the Directory Wizard; How to Configure Quick Search Manually

5-7
Cisco IP Communicator Administration Guide for Cisco CallManager
OL-4698-01
Chapter 5 Configuring Features and Services
Configuring Corporate and Personal Directories
For help, refer to Installing and Configuring the Cisco Customer Directory
Configuration Plugin, a document which guides you through the process of
integrating Cisco CallManager with Microsoft Active Directory and Netscape
Directory Server.
Related Topics
• Searching Directories with Cisco IP Communicator, page 5-5
• Configuring Quick Search, page 5-7
• Configuring Personal Directory, page 5-13
Configuring Quick Search
To configure Quick Search—a feature specific to Cisco IP Communicator—use
the Directory Wizard. (To install the Directory Wizard, run the
Cisco IP Communicator Administration Tool. See the “Running the
Cisco IP Communicator Administration Tool” section on page 2-14 for details.)
See the following topics for more information:
• Understanding How Quick Search Works, page 5-7
• How to Configure Quick Search Using the Directory Wizard, page 5-8
• How to Configure Quick Search Manually, page 5-10
• Specifying User Authentication Information for Quick Search, page 5-11
• Applying Dialing Rules to Quick Search Dialing, page 5-12
Tip Users must restart Cisco IP Communicator before accessing the Quick Search
feature.
Understanding How Quick Search Works
If you want to set up Quick Search to access a personal or corporate directory that
exists on the Cisco CallManager server, use the Directory Wizard. The Directory
Wizard creates an XML configuration file (LdapDirectories.xml) that tells
Cisco IP Communicator which LDAP directories to search.