Name: Cisco IP Communicator
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Chapter 6 Customizing Cisco IP Communicator

Creating Custom Phone Rings

6-4

Cisco IP Communicator Administration Guide for Cisco CallManager

OL-4698-01

Related Topics

• RingList.xml File Format Requirements, page 6-2

• Configuring a Custom Phone Ring, page 6-4

Configuring a Custom Phone Ring

To create custom phone rings, follow these steps:

Procedure

Step 1 Create a PCM file for each custom ring (one ring per file). Ensure the PCM files

comply with the format guidelines that are listed in the “PCM File Requirements

for Custom Ring Types” section on page 6-3.

Step 2 Place the new PCM files that you created in the C:\Program Files\Cisco\

TFTPPath directory on the Cisco TFTP server for each Cisco CallManager in

your cluster.

Step 3 Use an text editor to edit the RingList.xml file. See the “RingList.xml File Format

Requirements” section on page 6-2 for information about how to format this file

and for a sample RingList.xml file.

Step 4 Save your modifications and close the RingList.xml file.

Step 5 To cache the new RingList.xml file, stop and start the TFTP service by using

Cisco CallManager Serviceability or disable and re-enable the “Enable Caching

of Constant and Bin Files at Startup” TFTP service parameter (located in the

Advanced Service Parameters).

Cisco IP Communicator Administration Guide

Other manuals for Cisco IP Communicator