Cisco IP Communicator - Understanding Audio Modes

2-7
Cisco IP Communicator Administration Guide for Cisco CallManager
OL-4698-01
Chapter 2 Preparing to Deploy Cisco IP Communicator
Deployment and Configuration Checklist
Configuring features and settings in Cisco CallManager Administration
1. Configure
Cisco CallManager
telephony features such as
call waiting, call forward,
Call Park, Call Pickup;
establish a voice messaging
system.
As needed. Provides enhanced
telephony functionality.
• Telephony Features Available
for Cisco IP Communicator,
page 5-2
• Cisco CallManager
Administration Guide
• Cisco CallManager Features
and Services Guide
2. Modify button templates. As needed. Provides softkeys. Modifying Phone Button
Templates, page 5-15
3. Configure Cisco IP Phone
services.
Recommended. Gives users
access to information such as
stock quotes and weather
reports, which are displayed
on the phone as interactive
content with text and graphics.
• Setting Up Services,
page 5-16
• Cisco CallManager
Administration Guide
• Cisco CallManager Features
and Services Guide
4. Run the
Cisco IP Communicator
Administration Tool and
optionally enable HTTP
access.
You must run the tool in order
to install the Directory Wizard
(used to configure the Quick
Search and Dialing Rules
features). Additionally, you
must select the option to
enable HTTP access if any
users in your network rely on
unsupported VPN clients (the
tool sets up an IP reflector web
page to resolve audio IP
auto-detection problems).
Enabling HTTP access also
improves AutoUpdate
performance for remote users.
• Running the
Cisco IP Communicator
Administration Tool,
page 2-14
• Updating the Application,
page 3-7
• Resolving Audio IP Address
Auto-Detection Problems,
page 4-11
• Configuring Corporate and
Personal Directories, page 5-5
Table 2-2 Pre-Deployment and Configuration Checklist (continued)
Task Notes For details, see...