Cisco IP Communicator Administration Guide

2-9
Cisco IP Communicator Administration Guide for Cisco CallManager
OL-4698-01
Chapter 2 Preparing to Deploy Cisco IP Communicator
Deployment and Configuration Checklist
Related Topics
• Adding Devices to the Cisco CallManager Database, page 2-10
• Deploying the Application, page 3-2
• Updating the Application, page 3-7
• An Overview of Post-Installation Configuration Tasks, page 4-2
2. Set up a web site or use
another method to tell users
how to: install and configure
the application, obtain user
documentation, and access
the User Options web pages.
Recommended. Providing
users with this information can
improve their success with the
product.
Providing Information to Users Via
a Website, page A-1
3. Install audio devices on each
client PC or provide
installation information to
users.
You or the user will need to
install audio devices that rely
on drivers such as a USB
headset and USB handset.
Ideally, this task should be
performed before the
application is installed on the
client PC.
• Installing Headsets and Other
Audio Devices, page 3-1
• Selecting and Tuning Audio
Devices, page 4-6
4. Configure, or help users
configure, the installed
application as necessary.
Some configuration tasks may
be required before the
application will function at
initial startup.
Configuring the Application,
page 4-1
Table 2-2 Pre-Deployment and Configuration Checklist (continued)
Task Notes For details, see...

Cisco IP Communicator Specifications

General

Brand	Cisco
Model	IP Communicator
Category	Software
Language	English