1403
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
OL-27880-02
Chapter Show Commands
show svs connections
show svs connections
To display the current SVS connections to the Cisco Nexus 5000 Series switch for verification, use the
show svs connections command.
show svs connections [conn_name]
Syntax Description
Command Default None
Command Modes EXEC mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display information about the local and remote SVS connections:
switch# show svs connections
Local Info:
-----------
connection SVSConn:
ip address: 192.0.2.12
remote port: 21
vrf: default
protocol: vmware-vim https
certificate: default
datacenter name: DCName
extension key: Cisco_Nexus_1000V_1155927
dvs name: DVS_DC
DVS uuid: -
config status: Disabled
operational status: Disconnected
sync status: -
version: -
Peer Info:
----------
hostname: -
ip address: -
vrf:
protocol: -
extension key: -
conn-name (Optional) Name of the SVS connection. The name can be a maximum of
64 alphanumeric characters.
Release Modification
5.2(1)N1(1) This command was introduced.
To Next Page
Loading...
