1404
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
OL-27880-02
Chapter Show Commands
show svs connections
certificate: -
certificate match: -
datacenter name: -
dvs name: -
DVS uuid: -
config status: Disabled
operational status: Connected
switch#
This example shows how to display the SVS information of the local machine:
switch# show svs connections SVSConn
Local Info:
-----------
connection SVSConn:
ip address: 10.0.0.1
remote port: 21
vrf: default
protocol: vmware-vim https
certificate: default
datacenter name: DCName
extension key: Cisco_Nexus_1000V_1199955927
dvs name: DVS_DC
DVS uuid: -
config status: Disabled
operational status: Disconnected
sync status: -
version: -
switch#
Related Commands Command Description
svs connection Enables an SVS connection.