Cisco Nexus 5500 Series - Page 411

1405
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
OL-27880-02
Chapter Show Commands
show system vlan reserved
show system vlan reserved
To display the system reserved VLAN range , use the show system vlan reserved command.
show system vlan reserved
Syntax Description This command has no arguments or keywords.
Command Default None
Command Modes Any command mode
Command History
Examples This example shows how to display the system reserved VLAN range:
switch# show system vlan reserved
system current running vlan reservation: 3968-4095
switch#
Related Commands
Release Modification
5.2(1)N1(1) This command was introduced.
Command Description
system vlan reserve Confiugres the reserved VLAN range.
write erase Reverts to the default reserved VLAN range.