Cisco Nexus 5500 Series - Page 58

152
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
OL-27880-02
Chapter E Commands
extension-key
extension-key
To configure the extension key to be used to connect to the vCenter Server, use the extension-key
command.
extension-key extn-ID
Syntax Description
Command Default None
Command Modes SVS connection configuration mode
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to configure the extension key for a vCenter Server:
switch# configure terminal
switch(config)# svs connection SVSConn
switch(config-svs-conn)# extension-key vckey
switch(config-svs-conn)#
Related Commands
extn-ID Extension ID. The ID can be a maximum of 80 alphanumeric characters.
Release Modification
5.2(1)N1(1) This command was introduced.
Command Description
show svs connections Displays SVS connection information.
svs connection Enables an SVS connection.