Cisco Nexus 5500 Series - feature interface-vlan

155
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
OL-27880-02
Chapter F Commands
feature interface-vlan
feature interface-vlan
To enable the creation of VLAN interfaces, use the feature interface-vlan command. To disable the
VLAN interface feature, use the no form of this command.
feature interface-vlan
no feature interface-vlan
Syntax Description This command has no arguments or keywords.
Command Default VLAN interfaces are disabled.
Command Modes Global configuration mode
Command History
Usage Guidelines You must use the feature interface-vlan command before you can create VLAN interfaces.
Examples This example shows how to enable the interface VLAN feature on the switch:
switch(config)# feature interface-vlan
Related Commands
Release Modification
5.2(1)N1(1) This command was introduced.
Command Description
interface vlan Creates a VLAN interface.
show feature Displays the features that are enabled or disabled on the switch.