Cisco Nexus 5500 Series - Page 72

166
Cisco Nexus 5500 Series NX-OS Layer 2 Interfaces Command Reference
OL-27880-02
Chapter F Commands
feature-set virtualization
switch(config)#
This example shows how to disable the virtualization feature on the switch:
switch# configure terminal
switch(config)# no feature-set virtualization
switch(config)#
Related Commands Command Description
feature vmfex Enables or disables Cisco Virtual Machine Fabric Extender (VM-FEX) on
the switch.
install feature-set
virtualization
Installs the virtualization feature set on the switch.
show feature-set Displays the status of the virtualization feature set.