10-27
Cisco ONS 15454 SONET/SDH ML-Series Multilayer Ethernet Card Software Feature and Configuration Guide, R4.0
78-15224-02
Chapter 10 Configuring Networking Protocols
Configuring IP Routing
Monitoring and Maintaining EIGRP
You can delete neighbors from the neighbor table. You can also display various EIGRP routing statistics.
Table 10-5 lists the privileged EXEC commands for deleting neighbors and displaying statistics. For
explanations of fields in the resulting display, refer to the Cisco IOS IP and IP Routing Command
Reference publication.
This is an example of output from the show ip eigrp interface privileged EXEC command:
Router# show ip eigrp interface
IP-EIGRP interfaces for process 1
Xmit Queue Mean Pacing Time Multicast Pending
Interface Peers Un/Reliable SRTT Un/Reliable Flow Timer Routes
PO0 1 0/0 20 0/10 50 0
Fa0 0 0/0 0 0/10 0 0
This is an example of output from the show ip eigrp neighbors privileged EXEC command:
Router# show ip eigrp neighbors
IP-EIGRP neighbors for process 1
H Address Interface Hold Uptime SRTT RTO Q Seq Type
(sec) (ms) Cnt Num
0 192.168.2.1 PO0 13 00:08:15 20 200 0 2
This is an example of output from the show ip eigrp topology privileged EXEC command:
Router# show ip eigrp topology
IP-EIGRP Topology Table for AS(1)/ID(192.168.3.1)
Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
r - reply Status, s - sia Status
P 192.168.1.0/24, 1 successors, FD is 30720
via 192.168.2.1 (30720/28160), POS0
P 192.168.2.0/24, 1 successors, FD is 10752
via Connected, POS0
P 192.168.3.0/24, 1 successors, FD is 28160
via Connected, FastEthernet0
This is an example of output from the show ip eigrp traffic privileged EXEC command:
Router# show ip eigrp traffic
IP-EIGRP Traffic Statistics for process 1
Table 10-5 IP EIGRP Clear and Show Commands
Command Purpose
Router# clear ip eigrp neighbors
{ip-address
|
interface
}
Deletes neighbors from the neighbor table.
Router# show ip eigrp interface
[
interface
] [
as-numbe
r]
Displays information about interfaces configured for
EIGRP.
Router# show ip eigrp neighbors
[
type-number
]
Displays EIGRP discovered neighbors.
Router# show ip eigrp topology
{
autonomous-system-number
]|
[[
ip-address
]
mask
}
Displays the EIGRP topology table for a given process.
Router# show ip eigrp traffic
[
autonomous-system-number
]
Displays the number of packets sent and received for all
or a specified EIGRP process.
To Next Page
Loading...
