Cisco ONS 15454 - Figure 2-2 Displaying ML-Series POS Statistics; Table 2-3 ML-Series POS Statistics Fields and Buttons; Table 2-4 POS Parameters

2-4
Cisco ONS 15454 SONET/SDH ML-Series Multilayer Ethernet Card Software Feature and Configuration Guide, R4.0
78-15224-02
Chapter 2 CTC Operations
Displaying ML-Series POS Statistics on CTC
Figure 2-2 Displaying ML-Series POS Statistics
Table 2-3 ML-Series POS Statistics Fields and Buttons
Button or Field Description
Baseline
Resets the software counters (in that particular CTC client only) temporarily to zero
without affecting the actual statistics on the card. From that point on, only the delta
in counters are displayed by this CTC. These new baselined counters are shown only
as long as the user displays the Performance window. If the user navigates to another
CTC window and comes back to the Performance window, the true actual statistics
retained by the card are shown.
Refresh
Manually refreshes the statistics.
Auto-Refresh
Sets a time interval for the automatic refresh of statistics.
Ta b l e 2 - 4 P O S Pa r a m e t e r s
Parameter Meaning
Rx Pre Hdlc Bytes Number of bytes received prior to the bytes undergoing HLDC
encapsulation by the policy engine
Rx Post Hdlc Bytes Number of bytes received after the bytes undergoing HLDC encapsulation
by the policy engine
Rx Packets Total number of packets received since the last counter reset
Rx Normal Packets Number of packets between the minimum and maximum packet size
received
Rx Shorts Number of packets below the minimum packet size received