Cisco ONS 15454 - Page 16

xvi
Cisco ONS 15454 SONET/SDH ML-Series Multilayer Ethernet Card Software Feature and Configuration Guide, R4.0
78-15224-02
About the Cisco IOS Documentation
Audience
Audience
To use this publication, you should be familiar with Cisco or equivalent optical transmission hardware
and cabling, telecommunications hardware and cabling, electronic circuitry and wiring practices, and
preferably have experience as a telecommunications technician.
Related Documentation
Use this Cisco ONS 15454 SONET/SDH ML-Series Multilayer Ethernet Card Software Feature and
Configuration Guide, R4.0 in conjunction with the following referenced publications:
• Cisco ONS 15454 Procedure Guide
• Cisco ONS 15454 SDH Procedure Guide
• Cisco ONS 15454 Reference Manual
• Cisco ONS 15454 SDH Reference Manual
• Cisco ONS 15454 Troubleshooting Guide
• Cisco ONS 15454 SDH Troubleshooting Guide
• Release Notes for the Cisco ONS 15454 Release 4.0
• Release Notes for the Cisco ONS 15454 SDH Release 4.0
• IOS Command Reference guides
Document Conventions
This publication uses the following conventions:
Convention Application
boldface Commands and keywords in body text.
italic Command input that is supplied by the user.
[ ] Keywords or arguments that appear within square brackets are optional.
{ x | x | x } A choice of keywords (represented by x) appears in braces separated by
vertical bars. The user must select one.
Ctrl The control key. For example, where Ctrl + D is written, hold down the
Control key while pressing the D key.
screen font
Examples of information displayed on the screen.
boldface screen font
Examples of information that the user must enter.
< > Command parameters that must be replaced by module-specific codes.