Index
IN-5
Cisco ONS 15454 SONET/SDH ML-Series Multilayer Ethernet Card Software Feature and Configuration Guide, R4.0
78-15224-02
Layer 2 protocol tunneling 8-9
OSPF 10-20, 10-33
tunneling 8-9
MSTP, interoperability with IEEE 802.1D 6-15
multicast, IP See IP multicast routing
N
neighbor discovery/recovery, EIGRP 10-21
networking protocols
IP multicast routing
10-35
IP routing 10-1
not-so-stubby areas See NSSA
NSSA, OSPF
10-15
O
OSPF
area parameters, configuring
10-15
configuring 10-3, 10-12
default configuration
metrics
10-18
route 10-17
settings 10-10
described 10-9
interface parameters, configuring 10-13
LSA group pacing 10-19
monitoring 10-20, 10-33
network area command 10-3
process ID 10-3
router IDs 10-20
route summarization 10-17
virtual links 10-17
P
passive interface OSPF 10-18
passwords 3-7
path cost for STP 6-18
PC, connecting to switch 3-5
per-VLAN Spanning Tree+ 6-8
PIM
configuring
10-36
modes 10-35
rendezvous point 10-35
pin mappings for RJ-11 to RJ-45 3-4
policers for each matched traffic class 13-3
policy maps for QoS
characteristics of
13-4
configuring 13-3
port-channel command 9-2
port channels 9-2
port IDs 4-2
port priority, STP 6-17
POS
configuring interfaces
4-12
description 4-8
SONET alarms 4-15, 4-17
pos delay triggers command 4-17
pos report command 4-16
pos scramble-atm command 4-15
privileged EXEC mode 3-11
procedures, connection 3-5 to 3-6
protocol-dependent modules, EIGRP 10-22
Protocol Independent Multicast See PIM
PVST+. See per-VLAN Spanning Tree+
Q
QoS
class maps
13-2
marking action in policy map 13-3
policers 13-4
policy maps 13-3
To Next Page
Loading...
