Cisco ONS 15454 - Page 7

Contents
vii
Cisco ONS 15454 SONET/SDH ML-Series Multilayer Ethernet Card Software Feature and Configuration Guide, R4.0
78-15224-02
CHAPTER 8 Configuring IEEE 802.1Q and Layer 2 Protocol Tunneling 8-1
Understanding IEEE 802.1Q Tunneling 8-1
Configuring IEEE 802.1Q Tunneling 8-4
IEEE 802.1Q Tunneling and Other Features 8-4
Configuring an IEEE 802.1Q Tunneling Port 8-4
Router A Configuration Example 8-5
Router B Configuration Example 8-6
Understanding Layer 2 Protocol Tunneling 8-6
Configuring Layer 2 Protocol Tunneling 8-7
Default Layer 2 Protocol Tunneling Configuration 8-7
Layer 2 Protocol Tunneling Configuration Guidelines 8-8
Configuring a Layer 2 Tunneling Port 8-8
Monitoring and Verifying Tunneling Status 8-9
CHAPTER 9 Configuring Link Aggregation 9-1
Understanding Link Aggregation 9-1
Configuring EtherChannel 9-2
EtherChannel Configuration Example 9-3
Configuring POS Channel 9-4
POS Channel Configuration Example 9-5
Understanding Encapsulation over EtherChannel or POS Channel 9-7
Configuring Encapsulation over EtherChannel or POS Channel 9-7
Encapsulation over EtherChannel Example 9-8
Monitoring and Verifying EtherChannel and POS 9-10
CHAPTER 10 Configuring Networking Protocols 10-1
Understanding IP Routing Protocols 10-1
Basic IP Routing Protocol Configuration 10-2
RIP 10-2
EIGRP 10-3
OSPF 10-3
BGP 10-4
Enabling IP Routing 10-4
Configuring IP Routing 10-5
Configuring RIP 10-5
RIP Authentication 10-8
Summary Addresses and Split Horizon 10-8
Configuring OSPF 10-9