Cisco SCE 8000

6-8
Cisco SCE8000 GBE Installation and Configuration Guide
Chapter 6 Cabling the Line Ports and Completing the Installation
Connecting the Line Ports to the Network
If Cisco SCE 8000 #5 is the redundant platform, Link 5 from both routers is connected to it and the actual
connections might look like this:
• Router 1: S=0/1, Cisco SCE 8000 #1 3/0/0
• Router 2: S=0/1, Cisco SCE 8000 #1 3/2/0
• Router 1: N=2/2, Cisco SCE 8000 #1 3/1/0
• Router 2: N=2/2, Cisco SCE 8000 #1 3/3/0
• Router 1: S=0/2, Cisco SCE 8000 #2 3/0/0
• Router 2: S=0/2, Cisco SCE 8000 #2 3/2/0
• Router 1: N=2/4, Cisco SCE 8000 #2 3/1/0
• Router 2: N=2/4, Cisco SCE 8000 #2 3/3/0
• Router 1: S=0/3, Cisco SCE 8000 #3 3/0/0
• Router 2: S=0/3, Cisco SCE 8000 #3 3/2/0
• Router 1: N=3/1, Cisco SCE 8000 #3 3/1/0
• Router 2: N=3/1, Cisco SCE 8000 #3 3/3/0
• Router 1: S=1/3, Cisco SCE 8000 #4 3/0/0
• Router 2: S=1/3, Cisco SCE 8000 #4 3/2/0
• Router 1: N=3/2, Cisco SCE 8000 #4 3/1/0
• Router 2: N=3/2, Cisco SCE 8000 #4 3/3/0
• Router 1: S=1/5, Cisco SCE 8000 #5 3/0/0
• Router 2: S=1/5, Cisco SCE 8000 #5 3/2/0
• Router 1: N=3/4, Cisco SCE 8000 #5 3/1/0
• Router 2: N=3/4, Cisco SCE 8000 #5 3/3/0