Cisco SCE 8000 User Manual

B-8
Cisco SCE8000 GBE Installation and Configuration Guide
Appendix B CLI Commands to Verify a Successful Installation
CLI Command Output Samples
show system operational status
SCE8000> show system operation-status
System Operation status is Operational
show interface linecard
SCE8000> show interface LineCard 0
The application assigned to slot 0 is /apps/data/scos/app/en35156.sli
Silent is off
Configured shutdown is off
Shutdown due to sm-connection-failure is off
Resulting current shutdown state is off
WAP handling is disabled
show interface linecard connection-mode
SCE8000> show interface linecard 0 connection-mode
slot 0 connection mode
Connection mode is inline
slot failure mode is external-bypass
Redundancy status is standalone
show interface linecard link mode
SCE8000> show interface LineCard 0 link mode
Link mode on all links
Current link mode is : forwarding
Actual link mode on active is : forwarding
Actual link mode on failure is: monopath-bypass
show interface linecard external-bypass
sce1> show interface LineCard 0 external-bypass
External bypass current state is 'not activated'.
External bypass failure state is 'activated'.
Amount of expected external bypass devices: 2 (automatically configured).
Amount of detected external bypass devices: 2

Cisco SCE 8000 Specifications

General

Brand	Cisco
Model	SCE 8000
Category	Switch
Language	English